General Features
|
| - Temperature range: |
| - Operational: -20°C to +55°C (ETSI compliant) |
| - Fonctional: -30°C to +80°C |
| - Storage: -40°C to +85°C |
| - Casing: PC/ABS material UL94V-0 flammability |
| - Shock and Vibration : SAE J1211 |
| - Dimensions: 58.6 x 60 x 13mm |
| - Weight: 45g |
Electrical Characteristics
|
| - Supply voltage range: 6-32V DC > |
| - Current consumption during idle: 58mA Typical at 12V DC |
| - Current consumption during transmission: 104mA Typical at 12V DC |
| - Current consumption during power saving: 8mA Typical at 12V DC |
GSM/GPRS
|
| - Wireless Microprocessor - WMP100 - approved module by AT&T; PTCRB Certified & FCC Certified - Sierra Wireless |
| - Frequency band: 850 / 900 / 1800 / 1900 MHz |
| - Built in Quad Band GSM antenna |
| - SIM card interface 1.8/3.0V |
| - SIM card holder: Flip type; SIM card is accessible under the lid |
GPS
|
| - GPS engine : CompactRide emD1000k (eRide Inc.) |
| - Positioning Accuracy : 7m outdoors (CEP 95%) and <20m indoors |
| - A-GPS position aiding |
| - High sensitivity down to -155.5dBm for both acquisition and tracking |
| - TTFF typically 3s when hot and <40s from cold (outdoors) |
| - Built-in antenna |
COMMUNICATION WITH BACKEND
|
| - Embedded software for faster time to market Or Customizable OpenAT application |
| - GSM / GPRS (TCP or UDP) or SMS communincation channels |
STATUS INDICATORS
|
| - One red color LED indicating GPS position fix |
| - One greeen color LED indicating GSM registration |
ELECTRICAL INTERFACE
|
| - 10-pin connector |
| Connection for : |
| - Power supply |
| - Open collector output (able to drive external LED/relay 250mA) x2 |
| - Digital input x2 : active between 6v to 32V DC |
| - Analog input x1 |
| Connecting cable : |
| - 10 pin plug |
| - Wire harness |
| - 2A fuse on power |
| - Relay socket (for starter connection) |
FUNCTION AND FEATURE
|
| - Immediate reporting of vehicle status (position, speed, mileage, ignition) |
| - Disable/Enable ignition - engine |
| - Configurable alert messages for overspeed, geofence, ignition, etc. |
| - Software/Firmware upgrade over the air |
SERVICE PORT
|
| Accessible from outside after removing a plastic lid |
| - Serial port at logic 2.8V TTL level + other electrical test point |
- Using external RS232 tansceiver for connection to a PC, for diagnostic &
software upgrade |
COMPLIANCE
|
| - FCC Part 15B, 22H & 24E Certification |
| - PTCRB Certification |
| - RoHS |
ACCESSORIES
|
| - Optional external battery |
| - OBD2 wire harness0 |
| - Plastic blister for protection and mounting |
